Manufacturing NewsTEG DailyNovember 20, 2026

November 20, 2026 · Gibson County · Story 3 of 5

Toyota's Scion KEI-01 Arrives in Princeton at $680,000 Per Job

Toyota unveiled the revived Scion brand and its first product, the KEI-01 ultra-compact utility truck, on November 9 and 10, confirming the truck will be assembled at Toyota Motor Manufacturing Indiana in Princeton, Gibson County, starting in the second half of 2027. The $34 million investment adds approximately 50 jobs.

The KEI-01 is built as a 25-mile-per-hour Low-Speed Vehicle under federal safety rules, a regulatory lane built for golf courses, campuses, and fleet delivery where Polaris, Club Car, and E-Z-GO already compete, not a direct challenge to Slate Auto's electric compact pickup ramping in Warsaw. The $34 million investment divided by 50 jobs works out to roughly $680,000 in capital per job, a ratio consistent with low-volume knockdown-kit assembly rather than a structural headcount build. Gibson County's roughly 500 automotive suppliers shouldn't expect much new work from this line unless Toyota later localizes content the way it did moving from Hilux to Tacoma production.

Impact
Indiana is quietly becoming a two-brand small-truck battleground: Slate Auto is already ramping its $24,950 electric compact pickup toward 150,000 units/year at a repurposed factory in Warsaw. But Toyota's KEI-01 is a 25-mph Low-Speed Vehicle under FMVSS 500: a deliberate retreat into a different regulatory lane (golf courses, campuses, fleet delivery) where Polaris, Club Car, and E-Z-GO dominate, not a head-to-head challenge to Slate. The $34M/50-job math works out to roughly $680,000 in capital per job, consistent with low-volume knockdown-kit assembly rather than a structural headcount build, meaning Gibson County's roughly 500 suppliers see minimal pull-through unless Toyota later localizes content the way it did with the Hilux-to-Tacoma lineage.
Watch
Whether Toyota shifts KEI-01 production from knockdown-kit assembly toward deeper domestic content, a move that would open stamped-panel and seating contracts to suppliers like Aisin and Toyota Boshoku already embedded in the Princeton ecosystem.
For the huddle

If Toyota follows its historical pattern of localizing content over time, how do we position our shop now to bid on stamped body panel or seating work before that localization window opens?

It's worth a call to Harris or Weyland directly to find out pricing and lead times on their modules before assuming the Elberfeld plant only takes work away from regional contractors.

Sources

  1. Toyota revives Scion, with an Indiana-built kei truck · wardsauto.com

Earlier coverage

From the brief, November 20, 2026

  1. Weyland Manufacturing Elberfeld Indiana: $11 Million Plant, Up to 101 Jobs by 2029
  2. Heating Bills Dip While PJM Capacity Costs Keep Climbing
  3. Toyota's Scion KEI-01 Arrives in Princeton at $680,000 Per Job
  4. Op-Ed Pushes Solar Permitting Reform, Skips the Ball State Numbers
  5. Bosma Enterprises Ships 750 Million Gloves a Year, All From One Ohio Plant

The whole day’s brief →

This story

Related

Manufacturers Energy Grant Program

Free for Gibson County manufacturers

Gibson County manufacturers receive free, ongoing energy auditing and cost control that reduces their energy bills and keeps them low, month after month. Every line item checked and validated, every opportunity found comes with a step-by-step guide to capture it.

EDCs: sponsor this program and it carries your organization's name For economic developers →